Home → News → Reasons for low output of ultrafine grinding mill

Reasons for low output of ultrafine grinding millPosted: 2020-12-10

The ultrafine grinding mill is the most popular grinding equipment in the market in recent years. The ultra-fine grinding machine has many models, complete functions, large output, and advanced materials. It has been developed through various checks. Yes, but in the actual production process, there will always be a small output of the mill. There are more than one reasons for this phenomenon. Here is an analysis of what factors affect the output of the ultrafine mill.

Ultrafine Grinding Mill

Ultrafine mill is a kind of grinding equipment widely used in mines, cement plants, and chemical plants, and is one of the important equipment for deep processing of non-metallic minerals. Because of the stable performance, strong adaptability and high cost performance of the ultrafine mill equipment, it is normal to be welcomed by customers. The reasons for the low output of ultrafine mills are summarized as follows:

1. No powder or little powder, low output. The powder locker is not adjusted properly and the seal is not tight, causing the powder to suck. The blade is worn out and the material cannot be shoveled.

2. The current of the main machine of the ultra-fine vertical mill rises while the current of the fan drops. If the feed is excessive, the air duct is blocked by the powder, the exhaust of the pipeline is not smooth, the circulating airflow heats up the main current, the machine temperature rises, and the fan current drops.

3. The finished powder is too coarse or too fine. The blades of the analyzer are severely worn and can not be classified, and the air volume of the fan is inappropriate.

4. The main machine of the ultra-fine vertical mill is noisy and vibrates. The feed volume is small. The blade is severely worn, the material cannot be shoveled, and the anchor bolts are loose. The material is hard and the impact is large, or there is no material layer; the grinding roller grinding ring is out of round and deformed seriously.

5. Fan vibration. Powder accumulation or unbalanced wear on the wind blades, loose anchor bolts.

6. The oil viscosity is too thick and the threaded pump oil cannot be pumped up, causing the upper bearing to be short of oil.

Ultra-fine Grinding Machine

The operation of the ultrafine mill equipment also has a great impact on the output of the equipment. If the operation is improper, the equipment will be damaged to a certain extent, which will affect the production of the equipment, which will affect the output of the equipment. The equipment must be operated correctly in accordance with the manufacturer's regulations.

Ultrafine Mill

The above mainly introduces some factors that affect the output of ultra-fine mills. If you still encounter any problems in the production, you can click on the online customer service of our website to ask, and we will reply to you as soon as possible.

Previous：HGM80 micro powder grinding mill deliver to Russia: Next：When global economy is weak, why are freight rates of China soaring!